Acctiva easy
Product information
- For charging or charge conservation of conventional lead-acid, lead-calcium/silver, or sealant type batteries (AGM, MF) as well as maintenance free lead-gel batteries
- Indication of battery charge status using bar charts in the display
- Charging of deeply discharged batteries possible
- Compact design thanks to primary switched mode power electronics
- A special cable allows the battery to be charged from the cigarette lighter
- Based on Active Inverter Technology
Technical data
Acctiva Easy | 1202 | 1204 | 1206 | 2403 | 6/12 | 12/24 |
---|---|---|---|---|---|---|
Nominal charging voltage | 12 V | 12 V | 12 V | 24 V | 6 V/12 v | 12 V/ 24 V |
Charging current | 2 AMP | 4 AMP | 6 AMP | 3 AMP | 4 AMP/3 AMP | 4 AMP/2,5 AMP |
Battery capacity | 1- 85 Ah | 2-135 Ah | 3-200 Ah | 1,5-100 Ah |
6 V:2-135 Ah 12 V:1,5-100 Ah |
12 V:2-135Ah 24 V:1,5-90Ah |
Mains voltage | 100 V - 230 V +/- 15% | 230 V | 230 V | |||
Charging characteristic | IUoU | |||||
Marks of conformity | CE/ TÜV North America/ TÜV PSE (Japan)/ TÜV NSW (Australien) | |||||
Battery charger lead with terminals |
1,95 m | |||||
Battery charger lead with on-board plug |
1,95 m | |||||
Dimensions | 119 x 72 x 52 mm (L x W x H) | |||||
Weight | 220 g | 240 g | 250 g | 250 g | 240 g | 250 g |
Final charge voltage | 13,5- 14,4 V | 27-28,8V |
6 V:6,75-7,2 V 12 V:13,5-14,4V |
12V:13,5-14,4V 24V:27-28,8V |
Equipment features
Appications
- Charging: The ACCTIVA Easy charges batteries fully automatically and gently until they reach their maximum capacity. After charging, the charger automatically switches over to conservation charging in order to avoid self-discharge.
- Testing: The ACCTIVA Easy uses the measured open circuit voltage to determine the battery charge state and the startability of the battery. To test its performance, simply start the vehicle.
- Checking: The ACCTIVA Easy checks the function of the alternator. A measurement shows whether the voltage generated lies inside or outside the permitted range.
- Replacing: If the vehicle’s battery is removed or replaced, stored data (e.g. radio, clock, etc) is retained. The ACCTIVA Easy temporarily replaces the battery as the power supply unit.
Protective features
- Electronic reverse polarity protection
- Thermal overload protection
- Safety cut-out
- Electronically safe
- Short-circuit protection