charging solutions

Breakout leads/boxes

This kit includes Pico connector breakout leads for four of the more common connectors used on VAG and other manufcturers' engines.

The kit also include the popular TA034 and TA035 fuse extension leads for measuring current via the fuse box.

This kit contains:

  • TA190 2-pin ACS breakout lead
  • TA191 3-pin Kostal breakout lead
  • TA194 2-pin Kostal breakout lead
  • TA267 3-pin ACS breakout lead
  • TA034 Extension lead for ATC-style fuses
  • TA035 Extension lead for mini-style fuses
 

Foam tray for your TA069 CAN test box.

The Pico CAN test box gives you easy access to the 16 pins of the diagnostic connector that is fitted to all modern vehicles. Depending on the configuration of the vehicle, this will allow you to check power, ground and CAN bus signal quality on some or all of the vehicles CAN buses. With the test leads supplied, you can connect your PicoScope automotive oscilloscope, or any other suitable scope, to the CAN test box to monitor any signals present, such as the CAN High and Low signals.

The CAN test box connects to a vehicle's OBDII / EOBD connector and lets you easily diagnose electrical faults.

  • Instantly check power and ground circuits
  • Identify communication link protocols
  • Connect an oscilloscope for signal capture and collection of signal waveform data

This kit includes Pico connector breakout leads for four of the more common connectors used on VAG and other manufcturers' engines.

The kit also include the popular TA034 and TA035 fuse extension leads for measuring current via the fuse box.

This kit contains:

  • TA190 2-pin ACS breakout lead
  • TA191 3-pin Kostal breakout lead
  • TA194 2-pin Kostal breakout lead
  • TA267 3-pin ACS breakout lead
  • TA034 Extension lead for ATC-style fuses
  • TA035 Extension lead for mini-style fuses

Pico’s universal 6-way breakout leads eliminate the need to own many specific breakout leads for engine diagnostics. The breakout leads are available with four different sizes of connectors, allowing you to connect to virtually any sensor in the engine compartment—of any vehicle—using just four leads. Never again will you need to search your workshop for that expensive vehicle- or sensor-specific lead.

  • Length: 370 to 420 mm (approx. 14.5 to 16.5 inches)
  • Connector size:
    • micro: 0.6 mm
    • small: 1.5 mm
    • medium: 2.3 mm
    • large: 2.8 mm

This kit contains all four breakout leads, along with a handy foam storage tray.

Do you need to measure the current through a circuit but can’t find anywhere on the vehicle where you can connect your current clamp?

Fuse extension leads are a simple accessory that can save you valuable time.

Fuse extension leads are quick and easy to use: simply remove the fuse (of the circuit you wish to test) from your fusebox and replace it with a fuse extension lead. Now insert the fuse into the extension lead. To measure the current drawn, just connect your Pico current clamp to the extension lead.

4 fuse extension leads are supplied, allowing you to use the leads with ATC, mini-ATC, JCASE, and Maxi style fuses.

The TA206 maxi fuse extension lead is designed to be used with standard maxi automotive fuses. The maxi fuse is a large blade-style fuse used to protect high-current circuits and handle large inrush currents on some vehicles.

Do you need to measure the current through a circuit but can’t find anywhere on the vehicle where you can connect your current clamp?

Fuse extension leads are a simple accessory that can save you valuable time.

Fuse extension leads are quick and easy to use: simply remove the fuse (of the circuit you wish to test) from your fusebox and replace it with a fuse extension lead. Now insert the fuse into the extension lead. To measure the current drawn, just connect your Pico current clamp to the extension lead.

Do you need to measure the current through a circuit but can’t find anywhere on the vehicle where you can connect your current clamp?

Fuse extension leads are a simple accessory that can save you valuable time.

Fuse extension leads are quick and easy to use: simply remove the fuse (of the circuit you wish to test) from your fusebox and replace it with a fuse extension lead. Now insert the fuse into the extension lead. To measure the current drawn, just connect your Pico current clamp to the extension lead.

The TA168 JCASE fuse extension lead gives easier access to standard and low profile JCASE fuses. JCASE is a cartridge style fuse with female terminal design, providing both increased time delay and low voltage drop to protect high current circuits & handle inrush currents.

Pages